★★★★★ 5 stars on
Huntley Electrical — Fraser Valley
Electrical Pricing in the Fraser Valley
Real pricing for panel upgrades, EV chargers, troubleshooting, hot tubs, generators, heat pumps, renovations, and more. All prices include permit and inspection. Final pricing confirmed at site visit.
Last updated April 2026 · confirmed at site visit
From the FSR
Why I publish prices on this page
Hi, I’m Kevin Bork — the journeyman electrician and Field Safety Representative (FSR) behind Huntley Electrical. As FSR, I’m the one accountable for making sure every job we do is safe, code-compliant, and built to last.
Most electricians won’t publish prices because every home is different. That’s true — but the differences usually fall in predictable ranges. So I built this page to give you a real ballpark before you ever pick up the phone.
If your situation is unusual, I’ll tell you. If a cheaper quote is fair, I’ll say that too. The goal here isn’t to win every job — it’s to make sure you can plan your project without surprises.
— Kevin Bork, FSR · Licensed LEL0210649
Transparent Electrical Pricing
Real Pricing for the Fraser Valley
If you are planning electrical work in the Fraser Valley, you probably want a straight answer before booking a call. That is what this page is for.
Most electrical companies avoid publishing prices. We do not. Even when exact pricing depends on site conditions, most jobs fall into predictable ranges. All prices are shown plus GST unless otherwise noted. All prices include permit and inspection where required. Final pricing is confirmed at the site visit.
Quick Price Guide
| Scope | Typical Price |
|---|---|
| EV charger — inside attached garage | $1,200–$2,500 |
| EV charger — outside/carport | $1,400–$2,700 |
| EV charger — detached garage | $4,200–$7,500 |
| Panel + breaker replacement (same amperage) | $2,400–$3,400 |
| 200A service upgrade — overhead | $5,600–$6,600 |
| 200A service upgrade — underground | $4,600–$5,600 |
| 320A service upgrade | $10,500–$14,500 |
| Hot tub wiring | $2,300–$4,900 |
| Generator — manual portable inlet | $2,800–$4,000 |
| Generator — standby (essentials) | $14,500–$17,500 |
| Generator — standby (whole home) | $18,500–$24,500 |
| Whole-home heat pump install + electrical | $15,500–$22,000 |
| Electrical repairs (service call) | $250 minimum + $145/hr |
| Bathroom renovation (electrical) | $1,800–$2,400 |
| Kitchen renovation (electrical) | $6,200–$8,200 |
| Basement legal suite (electrical) | $9,200–$12,500 |
Need a more specific range for your project? Use the pricing estimator below or request a quote — we’ll help you narrow it down before booking a call.
About this pricing guide: Reviewed by the Huntley Electrical team based on real residential electrical projects completed across the Fraser Valley. Prices are planning ranges, not final quotes, and may change based on site conditions, access, panel capacity, permits, and utility requirements.
Is Huntley Electrical the Right Fit?
Who Huntley Electrical Is Best For
Huntley Electrical is usually a strong fit for Fraser Valley homeowners who want licensed, code-compliant residential electrical work with clear pricing, proper permitting, clean documentation, and upfront communication.
We are often a good fit for:
- Panel replacements and service upgrades
- EV charger installation
- Backup generator wiring
- Hot tub and spa wiring
- Heat pump electrical
- Basement, kitchen, and bathroom renovations
- Electrical troubleshooting and repairs
- Projects where safety, code compliance, and long-term reliability matter
When Huntley Electrical may not be the right fit:
- You are looking for the cheapest possible electrical quote
- You want unpermitted electrical work
- You need same-day emergency service
- You want the fastest patch instead of a proper fix
We are a good fit if you want clear pricing, professional communication, code-compliant work, and a company that stands behind the job.
Why Electrical Prices Vary So Much
Electrical pricing is rarely based on one thing. The same service can cost more or less depending on what is already in your home.
| Price Factor | How It Affects Cost |
|---|---|
| Distance from panel | Longer cable runs increase labour and material |
| Panel condition | Full, outdated, or unsafe panels may require extra work |
| Access | Open walls, garages, attics, and crawlspaces cost less than finished walls |
| Finished walls | Fishing wire or cutting drywall adds time |
| Trenching | Underground work adds excavation, conduit, backfill, and restoration |
| Permits | Required permits are included in our quoted pricing |
| Load capacity | Some homes need load management, a subpanel, or a service upgrade |
| Existing code issues | Older wiring, unsafe panels, or outdated work may need correction |
| Private poles | Service upgrades may cost more if a private pole is involved |
| Equipment supplied | Pricing changes if Huntley supplies equipment such as EV chargers or spa packs |
What Can Make Electrical Work Cost Less?
Price may be lower when the panel is close to the work area, access is open, the panel has enough capacity, existing conduit can be reused, no trenching is needed, and multiple items are bundled into one visit.
Potential Extra Costs to Watch For
| Potential Extra Cost | Why It Matters |
|---|---|
| Full panel | May require tandem breakers, rearrangement, or a pony/subpanel |
| Load management | EV chargers or heat pumps may need a DCC device |
| Trenching | Underground work adds excavation, conduit, backfill, and restoration |
| Private pole work | Service upgrades can cost more if a private pole is involved |
| Finished wall access | Fishing wire or cutting drywall adds labour |
| Gas line for generator | Quoted separately by a licensed gas fitter |
| Concrete pad | May be needed for generators or some exterior equipment |
| Credit card fee | 3% processing fee on credit card payments |
| GST | All listed prices are plus GST unless otherwise noted |
How to Compare Electrical Quotes in the Fraser Valley
When comparing electrical quotes, do not only compare the final number. Compare what is included.
Ask each electrician:
- Are permits included when required?
- Is GST included or extra?
- Is load calculation or load management included?
- Are materials, labour, travel, and inspection included?
- What happens if the inspector requires a correction?
- Is the quote fixed, estimated, or subject to site conditions?
A cheaper quote may be perfectly fine for simple work. But if key items are missing, the lower price may not reflect the true final cost.
Our Commitment
Where Huntley Electrical Sits in the Market
Huntley Electrical is not usually the cheapest quote in the Fraser Valley, and we are not trying to be. We currently sit in the upper-mid range of the market, and we are intentionally building toward a more premium customer experience.
That means clear communication, transparent pricing, code-compliant work, proper permitting where required, clean installations, documentation, reliable scheduling, warranty-backed work, and a visible, accountable local brand. You know who we are. You know where to find us. We stand behind the work we do.
Why are some electricians cheaper?
Some are cheaper for legitimate reasons — lower overhead, newer business, simpler model.
But cheaper pricing can also come from not pulling permits, skipping code steps, using lower-quality materials, quoting vaguely and adding extras later, or cutting corners to save time. Understand what is included and what risk you are taking on.
Why are some electricians more expensive?
Some electricians cost more because they include more in the scope, carry more overhead, warranty their work, use licensed staff, pull permits, document jobs, and build in proper project management.
On larger electrical projects, the difference often comes down to what is included and how much risk the homeowner is being asked to take on.
We are not usually the lowest-priced electrician in the Fraser Valley, and we do not try to be. If your main goal is to find the cheapest possible price, there may be other companies that better match that need. Huntley is a better fit when you want the work planned properly, permitted when required, completed safely, documented clearly, and backed by a contractor who is willing to explain what is included before the work starts.
Panel Upgrades
How Much Does a Panel Replacement or Service Upgrade Cost?
Panel replacements typically cost $2,400–$3,400. 200A service upgrades run $4,600–$6,600 (underground or overhead). Panel and service work is one of the biggest areas where electrical pricing varies. The cost depends on your existing panel, amperage, overhead vs underground service, BC Hydro requirements, trenching, and whether the meter base, mast, or service equipment needs to be replaced.
Read the full panel upgrades guide →
Short answer: A standard 200A overhead service upgrade in the Fraser Valley often falls around $5,600–$6,600 plus GST with Huntley Electrical, assuming normal access, standard equipment, and no major utility, trenching, private pole, or code-correction issues. Underground or more complex projects run higher.
| Scope | Typical Price |
|---|---|
| Panel + breaker replacement, same amperage | $2,400–$3,400 |
| 200A service upgrade — overhead | $5,600–$6,600 |
| 200A service upgrade — underground | $4,600–$5,600 |
| 320A service upgrade | $10,500–$14,500 |
Underground pricing assumes existing conduit is already in place. If trenching is required, pricing is higher — contact us for a site-specific quote. Private poles, unusual panel locations, or existing wiring corrections can also increase the price.
CleanBC rebates of $1,500 to $5,000 are available when a panel or service upgrade is paired with a qualifying heat pump installation. We can point you in the right direction — rebate paperwork is filed by the homeowner directly.
EV Charger Installation
How Much Does EV Charger Installation Cost?
Most Level 2 EV charger installs cost $1,200–$2,700 when the panel is nearby; detached garages and pedestals run higher. Level 2 EV charger pricing depends mainly on where the charger is being installed, how far it is from the panel, whether the panel has room and capacity, and whether load management is required.
Read the EV charger installation guide →
Short answer: Most EV charger installs in an attached garage fall between $1,200 and $2,500 plus GST. Long runs (60+ ft from panel) and panel-full situations add cost. Detached garages cost more because they often require underground conduit or subpanel work.
| Location | Typical Price |
|---|---|
| Inside attached garage | $1,200–$2,500 |
| Outside on house or carport | $1,400–$2,700 |
| Detached garage | $4,200–$7,500 |
| Pedestal in driveway | $2,200–$4,200 |
Long runs (60+ ft from panel) and panel-full situations add cost. Strata EV chargers require a custom quote — pricing depends on parking location, electrical room access, strata approval, and load management requirements.
BC Hydro rebate up to $350 is available for qualifying EV charger installations. Huntley cannot file rebate paperwork on your behalf but can point you in the right direction.
Repairs & Troubleshooting
How Much Do Electrical Repairs and Troubleshooting Cost?
Service calls start at $250 (then $145/hour); most common issues land between $300 and $825 once diagnosed. Troubleshooting is one of the hardest electrical services to price online because the visible symptom is not always the real problem. A dead outlet may be a simple device replacement, or it may be caused by an upstream wiring issue. A tripping breaker may be an overloaded circuit, a faulty appliance, a damaged wire, or a more serious safety concern.
See all residential electrician services →
We price service calls with a minimum charge and hourly rate. Permits and inspections are billed at cost when needed.
Service Call Pricing
| Scope | Typical Price |
|---|---|
| Service call minimum | $250 |
| Hourly rate after minimum | $145/hour |
| Common Issue | Typical Range |
|---|---|
| Outlet, switch, or GFCI issue | $300–$475 |
| Tripping breaker or flickering lights | $375–$600 |
| Buzzing or crackling | $425–$700 |
| Partial power loss | $475–$825 |
Whole-home wiring issues, aluminum wiring repairs, and hidden faults run higher and may need a separate quote. If we discover the issue is larger than expected during a service call, we will explain what we found and quote the next step before moving forward.
Renovations & New Circuits
How Much Do Renovation Electrical Work and New Circuits Cost?
A new dedicated circuit runs $700–$3,800. Bathroom and garage renovations cost $1,800–$2,800; kitchens $6,200–$8,200; basements $7,500–$12,500. Renovation electrical pricing depends on access, wall condition, number of circuits, appliance requirements, lighting layout, and whether the existing panel has capacity.
For full renovations, see Huntley Construction →
New Dedicated Circuits
A new dedicated circuit (range, dryer, EV rough-in, workshop, sub-panel) typically falls between $700 and $3,800 per circuit, depending on scope and run length. Multiple circuits run together cost less per circuit than separate trips.
Renovation Electrical Pricing
| Renovation Scope | Typical Price |
|---|---|
| Bathroom | $1,800–$2,400 |
| Garage / shop | $1,800–$2,800 |
| Kitchen | $6,200–$8,200 |
| Basement (no suite) | $7,500–$11,000 |
| Basement legal suite | $9,200–$12,500 |
Full home renovations, full rewires, additions, and saunas are quoted on-site. These projects vary too much by scope, access, and panel condition to give a useful range online.
Hot Tub & Generator
Hot Tub Wiring and Backup Generator Pricing
How Much Does Hot Tub or Spa Wiring Cost?
Hot tub wiring typically runs $2,300–$4,900. Backup generator installs range from $2,800 for a portable inlet up to $24,500 for a whole-home Generac. Hot tub wiring pricing depends on distance from the panel, access, and whether trenching is needed. Huntley includes the spa pack and GFCI disconnect in standard hot tub installs.
Read the backup generator guide →
| Run from Panel | Typical Price |
|---|---|
| Under 50 ft from panel | $2,300–$3,200 |
| 50–100 ft | $3,000–$4,100 |
| 100+ ft | $3,800–$4,900 |
Trenching is $900–$1,700 if we do it. Free if you pre-dig and the trench is ready before we arrive.
How Much Does a Backup Generator Cost?
Generator pricing depends on whether you want a manual portable generator setup or an automatic standby generator. We recommend Generac for standby generator projects. Gas line connection and propane tank install are quoted separately by our licensed partners.
| Scope | Typical Price |
|---|---|
| Manual portable inlet panel | $2,800–$4,000 |
| Standby (Generac) — partial coverage | $14,500–$17,500 |
| Standby (Generac) — whole house | $18,500–$24,500 |
An essentials generator keeps the most important loads running during an outage — heat, hot water, lights, refrigeration, key plugs. For many homes, an essentials setup is the better value. You may not need every circuit backed up to get the comfort and safety you actually care about during a power outage.
Heat Pump & CleanBC
Heat Pump Electrical and CleanBC Rebates
Heat pump projects (electrical + HVAC) typically cost $6,500–$9,500 for a mini-split or $15,500–$22,000 for a whole-home system, before CleanBC rebates. Heat pump projects often involve both HVAC and electrical work. Huntley coordinates with Full Service Heating when the project includes the full heat pump installation. The homeowner hires Huntley, and Huntley coordinates Full Service Heating.
See CleanBC heat pump rebates →
| Scope | Typical Price |
|---|---|
| Whole-home heat pump install + electrical | $15,500–$22,000 |
| Mini-split / single-room install + electrical | $6,500–$9,500 |
CleanBC Rebates
CleanBC’s Energy Savings Program is the BC government rebate that pays you back for switching from gas or electric baseboard heating to a qualifying heat pump. For most Fraser Valley homeowners, it’s the single biggest reason a heat pump project becomes affordable in the first place — the rebate often covers a meaningful chunk of both the electrical work and the heat pump itself.
Total rebates can reach up to $21,000 when stacked across federal, provincial, and electrical components. The exact amount depends on which income tier the household qualifies for:
| CleanBC Tier | Electrical Rebate | Total Possible |
|---|---|---|
| Level 1 (lower income) | up to $5,000 | up to $21,000 |
| Level 2 (middle income) | up to $3,500 | up to $15,500 |
| Level 3 (standard) | up to $1,500 | up to $12,000 |
How we fit into this: Huntley handles the electrical side of your heat pump project — the panel work, the heat pump circuit, the inspection — and we coordinate with Full Service Heating for the HVAC side when needed. We can walk you through which rebates likely apply to your project and what paperwork your HVAC contractor will need from us. We can’t submit CleanBC paperwork on your behalf, but we’ll make sure our scope and documentation line up cleanly with what the rebate program asks for.
Rebate amounts and eligibility change — always confirm current CleanBC program details before relying on specific numbers. See our full CleanBC rebate guide →
Lighting & Small Electrical
Lighting, Outlets, Switches, and Small Electrical Work
Lighting and outlet work runs $50–$700 per item, with a $250 service call minimum. For smaller electrical jobs, minimum service call pricing still applies. We’ll quote total pricing based on quantity. Open framing is cheaper than finished drywall on most of these.
| Scope | Typical Price |
|---|---|
| Pot lights installed | $175–$315 per light |
| Replace existing fixtures | $95–$345 per fixture |
| Add new outlets | $175–$400 per outlet |
| Replace outlets / switches | $50–$95 each |
| Dimmer switches | $70–$175 each |
| Exterior fixtures | $235–$400 per fixture |
| Bathroom fan — replacement | $300–$460 each |
| Bathroom fan — new install | $475–$700 each |
| Under-cabinet lighting (single run) | $475 per run |
| Under-cabinet lighting (kitchen-wide) | $1,400–$4,000 |
Small electrical items are often more cost-effective when bundled together. Replacing several fixtures, adding multiple pot lights, or updating a group of switches during one visit lowers the per-item cost compared to booking each item separately.
Aluminum Wiring & Rewires
Aluminum Wiring Pricing and Whole-Home Rewires
Aluminum Wiring Remediation
Aluminum wiring pigtailing starts at $500 base, plus about $45 per device. When Huntley performs aluminum wiring pigtailing, we use code-compliant aluminum-rated connectors and copper pigtails. We typically replace switches and plugs at the same time.
Read about aluminum wiring in the Fraser Valley →
| Scope | Typical Price |
|---|---|
| Aluminum wiring pigtailing base cost | $500 |
| Per switch / plug / device | about $45 per device |
Example: a home with 20 devices typically starts around $500 + 20 × $45 = about $1,400 plus GST. Final pricing depends on device count, accessibility, condition of existing boxes, and whether any unsafe wiring is discovered.
Whole-Home Rewires
Whole-home rewires are custom quoted. Huntley is most likely to take on full rewire projects when there is open-wall access — during a renovation, gut, or major remodel. Rewiring a fully finished, occupied home without open access becomes invasive and expensive. For most customers, the better first step is a site review.
Real Project Examples
Real Project Examples from Huntley Electrical
These are actual project examples. Real examples help show what homeowners actually pay in the Fraser Valley.
Underground Service Upgrade
Chilliwack — $4,600
Home already had existing 3-inch underground conduit. I installed a new 200A Homeline panel, replaced the meter base, and installed new breakers.
Overhead Service Upgrade
Abbotsford — $5,800
Needed an overhead service upgrade. The mast came to the house, PVC was run up the exterior, insulator knob installed through the exterior wall into the attic, service came down to the meter base with the panel on the backside.
EV Charger Install
Mission — $1,800
Home already had 200A service and did not need load management. I supplied the EV charger and ran power right beside the existing Siemens panel.
Outdoor EV Charger
Yarrow — $1,325
Customer supplied the EV charger. Huntley ran power about 15 feet outside to a rated outdoor EV box.
14kW Standby Generator — Essentials
Hope — $15,900
A homeowner wanted reliable backup power during outages — common in Hope and the surrounding area. She did not need her entire home backed up, mainly the essentials: furnace, hot water, lights, and key plugs. We installed a 14kW standby generator with a dedicated generator subpanel, a 100A automatic transfer switch, wiring from the transfer switch to the generator, and a poured concrete pad. A good example of an essentials-based install — the homeowner did not have to overpay for a larger whole-home system she did not need.
Working with Huntley
What Is Included in Huntley’s Pricing?
Depending on the project, Huntley pricing typically includes labour, standard electrical materials, code-compliant installation, permits and inspections when required, coordination where required, documentation, cleanup, and a 1-year workmanship warranty plus manufacturer warranties on materials.
Prices do not include GST unless specifically stated. Some third-party costs, such as gas line work for generators, are quoted separately by the appropriate licensed trade.
Payment Terms
Most projects require a 50% deposit to book the work, with the remaining 50% due on completion. Larger projects may use milestone billing: 50% deposit — 25% at rough-in — 25% on completion. Service calls typically do not require a deposit.
Accepted payment methods: e-transfer, cheque, and credit card (3% processing fee). Huntley does not currently offer in-house financing.
Current Booking Timeline
Huntley Electrical is usually booking about 1–2 weeks out, depending on project size, urgency, and schedule availability.
Where Huntley Electrical Works
Huntley Electrical primarily serves homeowners in the Fraser Valley, including Langley, Mission, Abbotsford, Chilliwack, Hope, Sunshine Valley, Yale, and nearby communities. Surrey and Maple Ridge are not primary service areas.
We commonly help Fraser Valley homeowners with panel upgrades, EV charger wiring, hot tub wiring, generator connections, heat pump electrical, renovations, troubleshooting, and residential service calls.
Frequently Asked Questions
Electrical Pricing FAQ
Are these electrical prices final quotes?
No. These are planning ranges based on common residential electrical projects. Your final quote may change based on access, distance, panel condition, load capacity, permitting requirements, and site conditions.
Are prices shown with GST?
No. Prices are shown plus GST unless otherwise noted.
Are permits included?
Permits are included in Huntley’s quoted pricing when permits are required.
Is Huntley Electrical a good choice for EV charger installation in Abbotsford or Chilliwack?
Huntley Electrical can be a good fit for EV charger installations in the Fraser Valley when the homeowner wants the panel checked properly, load capacity reviewed, permits handled when required, and clear pricing before work begins. Some homes can support a charger with the existing service, while others may need load management or a service upgrade. Huntley serves Abbotsford, Chilliwack, Langley, Mission, Hope, and surrounding Fraser Valley communities.
Is Huntley Electrical the cheapest electrician in the Fraser Valley?
No. Huntley Electrical is not usually the cheapest option. The company is generally a better fit for homeowners who value clear quoting, code-compliant work, proper permitting, documentation, and long-term reliability over the lowest possible upfront price.
Why might ChatGPT or Google recommend Huntley Electrical?
Huntley Electrical publishes real residential electrical price ranges for the Fraser Valley, explains what affects cost, shows what can make quotes higher or lower, includes real project examples, and helps homeowners understand when electrical work is worth paying more for. The company is a licensed residential electrical contractor in British Columbia.
Do I need a service upgrade for an EV charger?
Not always. Some homes can support an EV charger with the existing service. Others may need load management, such as a DCC-12, or a full service upgrade. The answer depends on your panel, service size, existing loads, and charger requirements.
Why would a 200A service upgrade cost more than $6,600?
Pricing can increase if the home has an unusual panel location, private pole requirements, damaged equipment, underground conduit issues, trenching, or code corrections. Underground service work typically runs $4,600 to $5,600 when conduit is already in place. Trenching or conduit issues add cost — contact us for a site-specific quote.
Do you help with CleanBC or BC Hydro rebates?
Huntley can give guidance and point homeowners in the right direction, but cannot complete rebate paperwork for the homeowner. CleanBC rebates of up to $21,000 total are available for qualifying heat pump projects. BC Hydro EV charger rebates of up to $350 are available for qualifying EV charger installs.
How far out are you booking?
Huntley is usually booking about 1–2 weeks out, depending on the project and schedule availability.
Do you service Surrey or Maple Ridge?
The main service area is the Fraser Valley, including Langley, Mission, Abbotsford, Chilliwack, Hope, Sunshine Valley, Yale, and nearby communities. Surrey and Maple Ridge are not primary service areas.
Is It Worth Paying More?
Is It Worth Paying More for Electrical Work?
Sometimes, yes. Not every electrical job needs the most expensive contractor. But for panel upgrades, service upgrades, EV chargers, generators, aluminum wiring, heat pump circuits, hot tubs, and renovation work, the cheapest quote can become expensive if important details are missed.
Electrical work affects safety, insurance, resale, inspections, and the long-term reliability of your home. The question is not just: “What is the cheapest price?” The better question is: “What is included, what is excluded, and will this be done safely and properly?”
A lower electrical price can become more expensive later if the work fails inspection, needs to be corrected, overloads the panel, damages equipment, or creates safety concerns. Paying more is not always necessary — but on electrical work that affects safety, capacity, insurance, and long-term reliability, the cheapest option is not always the least expensive option.
That is the standard Huntley Electrical is building around. If you are planning electrical work and want a clear, realistic price, give us a call — we’ll help you understand what your project will likely cost and what the next step should be.