★★★★★ 5 stars on
Mission Generator Specialists
Backup Generator Installation in Mission
Portable and standby generator installation for Mission homes, acreages, and rural properties. Power outage protection — fully permitted and TSBC-inspected.
Mission Electricians
Reliable Standby Power for Mission Homes
Mission’s geography makes backup power a practical necessity. Rural properties on wells lose water the moment power fails. Homes near low-lying flood zones need sump pump protection. And Mission’s location means power outages during windstorms can last 12–24 hours — long enough to spoil food, freeze pipes, and leave families without heat.
Huntley Electrical installs portable generator inlets and fully automatic Generac standby systems for Mission properties. Every install is fully permitted and inspected.
Call Kevin — 778-988-3347
Mission Generator Pricing
Backup Generator Installation Cost in Mission
Prices include transfer switch, labour, permit, and TSBC inspection. Generator unit cost is separate. HST extra. Free on-site assessment before any work begins.
Portable Inlet — 30A
$2,800–$3,400
~5 kW portable generator hookup with transfer switch, fully permitted
Generator unit sourced separately
Portable Inlet — 50A
$3,200–$4,000
~7–10 kW generator capacity, transfer switch, heavier service wiring
Good for homes with wells & HVAC
Standby (Generac)
From $14,500
Fully automatic standby — starts within 10 seconds of an outage, no manual hookup needed
Whole-home from $18,500
Gas line connection is partnered out and quoted separately. Full generator pricing →
Why Mission Needs Backup Power
Why Mission Homes Need Backup Generators
Mission has specific vulnerability factors that make generator backup more important than in urban centres:
- ✓Longer outage duration — Mission’s distribution infrastructure covers a large rural area; restoring power takes longer than in dense urban zones
- ✓Well water dependence — rural Mission properties on wells have no running water during a power outage without a generator
- ✓Flooding history — some Mission areas have experienced flood events; sump pumps must run continuously during heavy rain
- ✓Acreage properties — livestock, greenhouse, and shop operations can’t wait for utility crews to restore power
What We Install
Our Backup Generator Installation Services
Portable Generator Inlets
We install a weatherproof inlet box on your home and a transfer switch on your panel. You plug in any generator during an outage — no running extension cords, no back-feeding the grid.
Standby Generator Systems
Generac automatic standby generators start within 10 seconds of a power outage — no manual hookup needed. Connected to natural gas or propane, they run as long as needed.
Transfer Switch Installation
A properly installed transfer switch is required for any generator hookup. It protects utility workers and your appliances by safely disconnecting your home from the grid while the generator runs.
Local Considerations
Mission Neighbourhoods: Generator Considerations by Area
Mission’s diverse geography creates different generator needs by area:
- ●Downtown Mission & Cedar Valley — urban homes with municipal water; portable inlet is usually sufficient
- ●Hatzic & Dewdney Trunk corridor — mix of well water and sump pump properties; moderate to larger generator sizing needed
- ●Stave Falls & rural Mission — remote properties with longer outage exposure; standby systems with propane often the best choice
We assess Mission properties and recommend the generator type and size that actually fits your needs.
Generator Selection
Choosing the Right Generator for Your Home
The right generator depends on what you’re protecting, your fuel options, and your budget. Here’s how to think about it:
Essential circuits only
Sump pump, fridge, a few lights, and a heater — a 30A portable inlet ($2,800–$3,400) covers this scenario with a generator you own or rent.
Well water + HVAC
Well pumps and heat pumps draw significant power. A 50A inlet ($3,200–$4,000) with a 7–10 kW generator handles most homes comfortably.
Automatic protection
A Generac standby system starts itself — no manual hookup, no fumbling with extension cords at midnight. Ideal if outages are frequent or you’re often away from home.
Medical equipment dependence
If anyone in the home depends on medical equipment, a standby system is the right answer — it restores power in seconds, not minutes.
Why Huntley Electrical
Why Choose Huntley Electrical for Backup Generator Installation?
Assessment & Load Calculation
We assess your home’s electrical system, calculate your load requirements, and recommend the right generator type and size — not a one-size-fits-all quote.
Permitted Installation
We pull the TSBC permit, handle all transfer switch installation, and coordinate gas line work with licensed gas contractors for standby systems.
Inspected & Documented
Technical Safety BC inspector signs off on every job. We provide documentation for your insurance and property records.
Client Reviews
What Mission Homeowners Are Saying
“Had Kevin install a generator inlet last fall. First outage this winter — plugged in the generator and our whole house stayed running. Well pump, heat, fridge. Exactly what we needed.”
— Cedar Valley homeowner“Our sump pump failed during a power outage two years ago — flooded basement. We had Huntley install a generator inlet the next month. No issues since.”
— Hatzic homeowner“Kevin installed our Generac standby unit. Went on during the last wind storm — we didn’t even wake up. Exactly as advertised.”
— Stave Falls homeownerGenerator Stats
3-Step Process to a Safer, More Efficient Home
Common Questions
Frequently Asked Questions — Backup Generator Installation in Mission
How much does a backup generator installation cost in Mission?
A portable generator inlet (30A) runs $2,800–$3,400 installed, including transfer switch, permit, and TSBC inspection. A 50A inlet runs $3,200–$4,000. A standby Generac system for partial coverage starts at $14,500–$17,500. Whole-home standby runs $18,500–$24,500. HST extra.
Do I need a permit to install a generator in Mission?
Yes — all generator installations that connect to your home’s electrical system require a Technical Safety BC permit. We handle the permit as part of every install.
What size generator do I need for my Mission home?
For essential circuits (sump pump, fridge, heat, lights), a 5–7 kW portable generator is usually sufficient. For a whole home including well pump and HVAC, plan for 14–20 kW. We calculate your load requirements on-site before recommending a size.
Should I use natural gas or propane for my generator in Mission?
Natural gas is preferred where Fortis BC service is available — it’s piped in and unlimited. Rural Mission properties without gas access use propane tanks. Both work with Generac standby systems.
My Mission home has a well pump — will a generator run it?
Yes — we size generator systems to include well pump circuits. Well pumps draw 1–2 kW and are factored into every rural load calculation.
How long does generator installation take?
A portable inlet install typically takes 4–6 hours. A standby system is a 1–2 day project. Gas line connections are coordinated with a licensed gas contractor.
Does my electrical panel need to be upgraded before installing a generator?
Usually not for a portable inlet. Standby systems may require additional panel work. We assess this on-site before quoting.
Can I include my detached workshop or outbuilding on the generator?
Yes — if your workshop has a sub-panel fed from the main panel, we can include it in the generator transfer switch load. Separate structures may need additional work depending on the wiring.
Does Huntley Electrical service Mission?
Yes — we serve all of Mission including Cedar Valley, Hatzic, downtown Mission, Silverdale, Stave Falls, and rural properties throughout the area.
Related Services
EV Charger Installation in Mission
Level 2 EV charger installation — pair with your generator for full power independence.
Learn more →Electrical Panel Upgrade in Mission
Panel upgrades for Mission homes — often bundled with generator installs.
Learn more →Electrician in Mission
Full-service licensed electrician for Mission — repairs, circuits, renovations, and more.
Learn more →Contact
Book a Generator Assessment in Mission
Licensed generator installations for Mission homeowners — fully permitted and TSBC-inspected. Request a free assessment below or call us directly.
Also serving: Abbotsford, Langley, Hope, and all Fraser Valley generator installs.