Licensed Residential Electricians in Abbotsford

Yes — most electrical work in BC requires a permit from Technical Safety BC, including panel upgrades, EV charger installations, new circuits, and wiring changes. Huntley Electrical pulls all required permits on your behalf as part of every job. You don’t need to deal with the paperwork.

Panel upgrade costs in Abbotsford depend on the scope of work. A same-amperage panel replacement (new panel, breakers, and circuit reconnections) runs $2,400–$3,400. Upgrading from 100A to 200A service — including new service wires, meter base, BC Hydro coordination, permit, and inspection — typically runs $5,600–$6,600 overhead or $4,600–$5,600 with conduit already in place. Upgrading to 320A service for homes with dual EVs, a heat pump, or a shop runs $10,500–$14,500. See our full electrician pricing guide for detailed breakdowns. We provide a detailed written quote before any work begins — no surprise invoices.

Service calls for troubleshooting or minor repairs typically take 1–3 hours. Larger jobs like panel upgrades generally take a full day. EV charger installs usually run 2–4 hours depending on panel access and wire routing. We always give you a realistic time estimate before we start.

Yes. Huntley Electrical is a fully licensed electrical contractor registered with BC Safety Authority and carrying full liability insurance. All our electricians hold valid BC certifications. We work throughout the Fraser Valley including Abbotsford, Mission, Langley, and Hope.

Yes. We provide 24/7 emergency electrical service for urgent situations — burning smells, power loss, tripping breakers that won’t reset, exposed wiring, or anything that poses a safety risk. Call us directly for fastest response. We aim to be on-site the same day for genuine emergencies.

Yes. As a registered CleanBC contractor, we can help Abbotsford homeowners access rebates on qualifying electrical upgrades — including heat pump connections and EV charger installations. BC Hydro also offers up to $350 in rebates for EV charger installs through their stackable incentive programs. We walk you through what you qualify for at the time of booking.

Not always. Many Abbotsford homes with 200A service can accommodate a Level 2 EV charger without an upgrade. However, older homes on 100A service, or those with limited spare breaker capacity, may need a panel upgrade first. We assess your panel as part of every EV charger quote at no extra charge.

We serve all of Abbotsford including Clearbrook, West Abbotsford, Matsqui Prairie, Sumas Prairie, Mount Lehman, Auguston, Bradner, Mill Lake, Townline Hill, and Huntingdon. Huntley Electrical serves the full Fraser Valley — we cover all of Abbotsford.

A breaker that keeps tripping usually means one of three things: an overloaded circuit (too many devices drawing power), a short circuit (damaged wiring), or a faulty breaker. Some older Abbotsford homes with Federal Pioneer panels may have breakers that trip at lower loads than rated. If it keeps happening after you’ve reset it once, call an electrician — don’t keep resetting it.

The fastest way is to call us directly at (778) 988-3347. You can also fill out the contact form on this page for a callback within one business day. We offer free quotes for most jobs — no commitment required. We’ll ask a few questions about your project and give you a straight answer on cost and timeline.

Federal Pacific Stab-Lok and Zinsco panels were common in homes built from the 1960s through the 1980s and are well-represented in older Abbotsford neighbourhoods like Clearbrook and Abbotsford East. Both brands have documented safety issues — breakers that fail to trip under overload — which creates a fire risk. If your home still has one of these panels, replacing it is strongly recommended. We can assess your panel on the initial visit and provide a quote. A same-amperage replacement typically runs $2,400–$3,400.

Yes. Knob-and-tube wiring is still found in pre-1965 homes in Clearbrook and the older parts of Abbotsford. We can assess the condition of existing knob-and-tube, add new circuits where required, and replace deteriorated wiring. Insurance companies in BC increasingly require knob-and-tube to be addressed before issuing or renewing coverage — if you’re getting pushback from your insurer, give us a call and we’ll do an honest assessment of what needs to change and what can stay.

Yes. Adding a secondary suite in Abbotsford typically requires a dedicated electrical panel or sub-panel for the suite, plus separate circuits for kitchen appliances, bathroom, and lighting. A permit from Technical Safety BC is required. Many suites in older homes also trigger a 200A panel upgrade if the existing service is only 100A. We handle the full scope — assessment, panel upgrade if needed, suite wiring, permit, and inspection — so you’re ready for the city’s occupancy inspection. Budget $9,200–$12,500 depending on the scope and existing panel capacity.